BBVTL - DELTRON MIXING ACRYLIC URETHANE, DMD617
- MSDS: BBVTL
- Manufacturer: PPG INDUSTRIES
- Product Name: DELTRON MIXING ACRYLIC URETHANE, DMD617
- National Stock Number: 8010-00F006471
Product Identification
Product ID:DELTRON MIXING ACRYLIC URETHANE, DMD617
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006471
MSDS Number: BBVTL
Responsible Party
Emergency Phone: (304) 843-1300
Cage: 88383
Contractor
Telephone: 304-843-1300
Cage: 88383
Ingredients
VM&P NAPHTHA (SEE SUPPLEMENTAL FOR INGREDIENTS)
RTECS: BE7555000
Fraction By Weight: <5%
ACGIH TLV: 300 PPM
N-BUTYL ACETATE (SARA III)
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: 25 - 30%
OSHA PEL 150 PPM/200 STEL
ACGIH TLV: 150 PPM/200STEL;9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: <5%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: <0.5%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR
CAS: 7758-97-6
RTECS: GB2975000
Fraction By Weight: 30%
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.05MG/M3(CR)A2;8990
Hazards
Effects of Overexposure:SKIN, EYE & RESP TRACT IRRIT/CNS
DEPRESSION/HEADACHE/DIZZINESS/STAGGERING GAIT/CONFUSION OR COMA.
First Aid
First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. NOTIFY
PHYSICIAN. EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. TAKE TO
PHYSICIAN FOR DEFINITIVE MEDICAL TREATMENT. SKIN: WASH WITHER
WATER. REMO VE CONTAMINATED CLOTHING. CONSULT PHYSICIAN.
Fire Fighting
Flash Point:72F, PMCC
Lower Limits:1.5%
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. FOG NOZZLES
ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WATER TO COOL CLOSED CONTAINERS TO
PREVENT PRESSURE BUILD-UP & POSSIBLE AUTOIGNITION OR EXPLOSION.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
SURFACES & ELECTRICAL, STATIC OR FRICTIOL SPARKS). AVOID BREATHING
VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSBENT AND NON-SPARKING
TOOLS.
Handling
Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF
NFPCLASS IB FLAMMABLE LIQUIDS. DON'T TAKE INTERNALLY.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALING THE CONTENTS CAN BE HARMFUL OR FATAL. DON'T FLAME CUT,
BRAZE OR LD W/O NIOSH APPROVED RESPIRATORS OR APPROPRIATE
VENTILATION.
Exposure Controls
Respiratory Protection:OPEN AREAS: FILTER RESPIRATORS FOR OVERSPRAY.
_
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP
Eye Protection:SAFETY EYEWEAR
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
MSDS DATE: 09/28/83. WT/GAL: 10.56. ALSO CONTAINS: ORGANIC TIN
COMPOUNDS 0.5%, ACRYLIC ESTER MONOMERS (1001656AM) <0.5%, LD
(OF7525000) 22.2%.
Chemical Properties
Boiling Pt:B.P. Text:110-145C
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:51.3
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:FUMES MAY CONTAIN: CO, LEAD & CHROMIUM
OXIDES, TIN OXIDES.
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.